[科研][软件][OpenSees] OSBWTest: OpenSees BoucWen Material Test ( OpenSees BoucWen材料测试)

实干、实践、积累、思考、创新。


  • 程序图标 ( Program Icon )

  • 程序介绍 ( Program Introduction)

拖了很久,最近搞东西用到BoucWen这个材料,从OpenSees中搬过来,写个程序测试一下,因为和最原始的Bouc Wen模型还有点不同。

最原始的BoucWen模型在这里做了测试:[研究][软件] BWTest: Bouc-Wen模型参数测试分析 [Bouc-Wen Hysteretic Model Parameters Analysis]

关于BoucWen Material 的OpenSees介绍在OpenSeesWiki中找到:BoucWen Material – OpenSeesWiki (berkeley.edu)

命令也搬过来:

This command is used to construct a uniaxial Bouc-Wen smooth hysteretic material object. This material model is an extension of the original Bouc-Wen model that includes stiffness and strength degradation (Baber and Noori (1985)).

uniaxialMaterial BoucWen $matTag $alpha $ko $n $gamma $beta $Ao $deltaA $deltaNu $deltaEta

$matTag integer tag identifying material
$alpha ratio of post-yield stiffness to the initial elastic stiffenss (0< <math>\alpha</math> <1)
$ko initial elastic stiffness
$n parameter that controls transition from linear to nonlinear range (as n increases the transition becomes sharper; n is usually grater or equal to 1)
$gamma $beta parameters that control shape of hysteresis loop; depending on the values of <math>\gamma</math> and <math>\beta</math> softening, hardening or quasi-linearity can be simulated (look at the NOTES)
$Ao $deltaA parameters that control tangent stiffness
$deltaNu $deltaEta parameters that control material degradation

NOTES:

  1. Parameter <math>\gamma</math> is usually in the range from -1 to 1 and parameter <math>\beta</math> is usually in the range from 0 to 1. Depending on the values of <math>\gamma</math> and <math>\beta</math> softening, hardening or quasi-linearity can be simulated. The hysteresis loop will exhibit softening for the following cases: (a) <math>\beta</math> + <math>\gamma</math> > 0 and <math>\beta</math> – <math>\gamma</math> > 0, (b) <math>\beta</math>+<math>\gamma</math> >0 and <math>\beta</math>-<math>\gamma</math> <0, and (c) <math>\beta</math>+<math>\gamma</math> >0 and <math>\beta</math>-<math>\gamma</math> = 0. The hysteresis loop will exhibit hardening if <math>\beta</math>+<math>\gamma</math> < 0 and <math>\beta</math>-<math>\gamma</math> > 0, and quasi-linearity if <math>\beta</math>+<math>\gamma</math> = 0 and <math>\beta</math>-<math>\gamma</math> > 0.
  2. The material can only define stress-strain relationship.

OSBWTest的功能是,可提供用户导入位移历程,指定材料的参数,获得相应的力-位移滞回曲线,可用于分析不同参数对BoucWen Material的影响。

  • 程序界面 ( Program Interface )

  • 程序下载 ( Program Download )

如果您需要这个软件,请在这给网站捐助:http://www.jdcui.com/?page_id=4813,捐助不低于 100RMB,捐助后在评论区留下您的评论,软件会通过管理员QQ:3014479529给你发送,对软件有任何疑问也欢迎联系,敬请尊重劳动成果 !!!。)


You already voted!

  • 材料测试相关博文( Related Topics about Material Test)

[00] [笔记][编程][算法] 四段式单轴恢复力本构模型开发

[01] [科研][软件][OpenSees] OSBWTest: OpenSees BoucWen Material Test ( OpenSees BoucWen材料测试)

[02] [研究][软件] BWTest: Bouc-Wen模型参数测试分析 [Bouc-Wen Hysteretic Model Parameters Analysis]

[03] [笔记][非线性][OpenSees] 多个单轴二折线非线性本构并联后的滞回曲线是什么样子的?

[04] [程序][科研][本构] BMMF: Bilinear Material Model Fitting Tool [BMMF:二折线试验滞回曲线本构拟合工具]

[05] [下载][Tool][软件] OSMatTest: OpenSees Material Test [OpenSees单轴材料测试工具]

[06] OpenSees Concrete06 Material Test

[07] OpenSees ConcreteD Material Test

[08] OpenSees Concrete04 Material Test

[09] OpenSees Concrete02 Material Test

[10] OpenSees Concrete01 Material Test

[11] OpenSees RambergOsgoodSteel Material Test

[12] OpenSees Steel02 Material Test

[13] OpenSees Steel01 Material Test

[14] [OpenSees][科研] Pinching4 MatTest: Pinching4 Material Test and Paramete Correction [Pinching4材料参数测试及矫正拟合工具]

[15] [科研][OpenSees] BWBN Material (Pinching Hysteretic Bouc-Wen Material) Test

  • 相关博文( Related Topics)

[01] [科研][试验][工具] HLA v2020: Hysteretic Loop Analysis Program[HLA滞回环分析工具 2020版]

[02] [软件][科研][试验] 2021版 YPD: Yield Point and Ductility [2021版 YPD: 等效屈服点和延性分析程序]

[03] [科研][工具][软件] BBCA v2020: 滞回环骨架曲线提取工具 [BBCA: Extract Backbone Curve from Hysteretic Loop]

[04] [Tool][科研][试验] LoopArea: Hysteristic Loop Area Calculator [滞回环面积求解器]

[05] [科研][软件][试验] HLAV: Hysteresis Loop Animation Viewer [滞回环动画演示软件]

[06] [试验][软件][科研] OutlierRemoval: A Program for Removing the Abnormal Point of Your Test Data [试验数据异常点修正工具]

[07] [试验][软件][科研] Loop Modifier 2021: Hysteretic Loop Modification Program[2021版: 滞回曲线修正工具]

[08] [软件][试验][研究] SawtoothRemove: Remove the Sawtooth Patterns in Your Test Data [剔除试验数据中的锯齿]

[09] [软件][试验][编程] NoiseRemoval: A Program for De-Noising of Experimental Data [试验数据降噪修正工具]

[10] [软件][更新][Dynamics] NSDOF v2022: A Tool for Nonlinear Dynamic Analysis of SDOF System (NSDOF单自由度系统动力非线性分析工具 v2022)

[11] [工具][试验][更新] DataSmoothing v2022: A Program for Test Data Smoothing [试验数据曲线平滑+降噪工具]

[12] [软件][动力学][编程] NMDOF v2022: A Tool for Nonlinear Dynamic Time History Analysis of Shear-Type MDOF System (多自由度剪切层模型系统动力非线性时程分析工具 v2022)

[13] [研究][软件] BWTest: Bouc-Wen模型参数测试分析 [Bouc-Wen Hysteretic Model Parameters Analysis]

  • 微信公众号 ( Wechat Subscription)

WeChat_QRCode欢迎关注 “结构之旅” 微信公众号

5 thoughts on “[科研][软件][OpenSees] OSBWTest: OpenSees BoucWen Material Test ( OpenSees BoucWen材料测试)

  1. 晏颖琦 Reply

    崔博士,请问opensees中能考虑拉压不一致的模型本构吗

  2. 刺心 Reply

    崔博士,小白想问一些opensees的混凝土墩柱Bouc-Wen模型本构参数怎么确定啊,还有定义截面时,是直接把单轴b-c拿过来用吗?

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.