[工具][软件]OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]

实干、实践、积累、思考、创新。


一直想更新这个软件,这款软件最早在2017年开发出来的时候,算是全网唯一的opensees的纤维截面工具,最近终于可以抽时间进一步对这个软件进行更新。

  • 程序图标 ( Program Icon )

  • 程序介绍 ( Program Introduction)

OpenSees纤维截面可视化工具 (OpenSees Fiber Section Viewer)。程序基本功能是,解析OpenSees的.tcl文件,提取其中的纤维截面,显示具体的纤维截面剖分情况。OpenSees Fiber Section Viewer is a visualization program for fiber secion in OpenSees.

编写这个程序的主要目的是,由于很多.tcl文件编写时,纤维截面的定义采用的是 OpenSees 提供的path和layer命令,这些命令容易编写却不方便查看,难以检查具体的纤维截面剖分是否正确。尤其是在阅读别人编写的 .tcl 文件时,由于编写命令的习惯不同,更加难以检查 纤维截面的定义是否合理。因此,如果有一个程序能将OpenSees的fiber、path和layer命令解析出来,并形成纤维图形直观显示,将大大提高初学者阅读和检查.tcl文件的效率,本博文提供的这个小程序很好的解决了这个问题。The main purpose of writing this program is that when many .tcl files are written, the definition of fiber cross-section uses the path and layer commands provided by OpenSees. These commands are easy to write but inconvenient to view, and it is difficult to check whether the specific fiber cross-section is correct. . Especially when reading .tcl files written by others, it is more difficult to check whether the definition of fiber cross-section is reasonable due to the different habit of writing commands. Therefore, if there is a program that can parse the fiber, path and layer commands of OpenSees and form a visual display of fiber graphics, it will greatly improve the efficiency of beginners reading and checking .tcl files. This small program provided in this blog post is very good. solved this problem.

  • 程序更新 ( Program Update)

旧版的纤维截面可以在这个连接查看:http://www.jdcui.com/?p=5007

新版软件主要做了一下更新:

(1)OpenSees的TCL模型文件中文路径已经支持。

(2)修正了旧版软件部分截面提示“sqrt: DOMAIN error”错误无法进行截面显示的问题

(3)增加了纤维截面图形窗口的交互操作:平移,缩放等

(4)增加了错误提示窗口,若截面某部分定义出错,软件可在错误提示窗口中提示,使用者可根据提示检查相应的纤维截面定义命令。

(5)对于部分纤维定义错误的部分,如果纤维坐标没问题,会在图形中以交叉的方式显示,使用者可很清楚检查哪部分命令是错误的。

  • OpenSees中的纤维截面命令 ( Fiber Section Command in OpenSees )

OpenSees中的纤维截面如下所示,摘自 http://opensees.berkeley.edu/wiki/index.php/Fiber_Section

This commnand allows the user to construct a FiberSection object. Each FiberSection object is composed of Fibers, with each fiber containing a UniaxialMaterial, an area and a location (y,z). The command to generate FiberSection object contains in { } the commands to generate all the fibers in the object. To construct a FiberSection and populate it, the following command is used:

section Fiber $secTag <-GJ $GJ> {
fiber…
patch…
layer…

}

$secTag      unique tag among sections
$GJ              linear-elastic torsional stiffness assigned to the section (optional, default = no torsional stiffness)
fiber…        command to generate a single fiber
patch…       command to generate a number of fibers over a geometric cross-section
layer…        command to generate a row of fibers along a geometric-arc

NOTES:

The command to generate a FiberSection contains in { } the commands to generate all the fibers in the section.
The patch and layer commands can be used to generate multiple fibers in a single command.
In an element recorder you can ask a FiberSection for its ‘deformations’, ‘forces’, ‘forceAndDeformation’, ‘fiber $fiberNum $matArg1 ..’, ‘fiber $yLoc $zLoc $matTag $matArg1 ‘

——— from http://opensees.berkeley.edu/wiki/index.php/Fiber_Section

纤维截面的定义主要有三个命令: fiber, path和layer。OpenSees纤维截面可视化工具可支持对这三种命令进行解析。

fiber 命令:

patch 命令:

layer 命令:

  • 程序展示 ( Program Gallery)

Fiber Section Reinforced Concrete Section – Rectangular Symmetric Section, Confined Concrete Core

Fiber Section AISC Standard W Section

Fiber Section Reinforced Concrete Hollow Section

Fiber Section 工字钢

Fiber Section Reinforced Concrete Section – Circular Section

  • 下载 ( Downloads )

(  软件是免费的,如果需要这个软件,在评论区留下您的评论,软件会发送到您的评论邮箱,敬请尊重劳动成果 !!)  


You already voted!

  • 相关话题 ( Related Topics)

[01]. [Tool] OpenSees Material Test (OpenSees单轴材料测试工具)

[02]. OpenSees Steel01 Material Test

[03]. OpenSees Steel02 Material Test

[04]. OpenSees RambergOsgoodSteel Material Test

[05]. OpenSees Concrete01 Material Test

[06]. OpenSees Concrete02 Material Test

[07]. OpenSees Concrete04 Material Test

[08]. OpenSees ConcreteD Material Test

[09]. OpenSees Concrete06 Material Test

[10]. [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]

[11]. [科研][OpenSees] BWBN Material (Pinching Hysteretic Bouc-Wen Material) Test

[12]. [科研][OpenSees] BoucWen Material Test

[13]. [OFSV][案例][OpenSees] OSFSV: OSFiberSectionViewer提示“sqrt: DOMAIN error”错误的解决办法!!

[14]. [笔记][非线性][OpenSees] 多个单轴二折线非线性本构并联是什么样子的?

[15]. [科研][软件][OpenSees] OSBWTest: OpenSees BoucWen Material Test ( OpenSees BoucWen材料测试)

  • 微信公众号 ( Wechat Subscription)

WeChat_QRCode

欢迎关注 “结构之旅” 微信公众号

386 thoughts on “[工具][软件]OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]

  1. Phill Reply

    崔博士您好,求分享新版可视化软件,感谢感谢!!!

  2. Reply

    崔博士您好,希望下载您的这个软件,谢谢

  3. Taoge Bai Reply

    崔博士您好 希望能得到您的分享 谢谢崔博士~!

  4. nieleixin Reply

    崔博士您好,看了您的xianwei截面可视化工具,希望得到您的支持,非常感谢

  5. 嘻曦 Reply

    崔博士您好,希望能下载您的软件,十分感谢

  6. Chen Pipi Reply

    崔博士您好,希望能够使用您开发的这款纤维截面可视化工具,非常感谢!

  7. 林雨澄 Reply

    崔博士您好
    希望能夠下載您這個軟件,感激不盡!

  8. 郝鹏 Reply

    崔博士,您好!最近在学opensees,方便可以用一下您的软件吗,十分感谢!!

  9. hao Reply

    崔博士,您好!希望能使用您的纤维可视化截面。

  10. CZW Reply

    崔老师您好,我需要您开发的这个程序查看截面纤维编号,感谢无私分享。

  11. CHEN Reply

    崔博士您好,非常希望能使用您开发的可视化软件,希望可以收到您的分享,谢谢您!

  12. 王志远 Reply

    非常感谢崔博士的开发,希望能使用到崔博士的新版opensees截面工具箱。感谢。

  13. Vassilis Papanikolaou Reply

    Dear Dr. Cui,
    I would be grateful if you could share the new version of your software. Thank you in advance.

  14. 小马 Reply

    感谢崔博士的开发,希望能用到您这个软件,谢谢

  15. Micheal-Cai Reply

    崔老师,您好,非常感谢您百忙中编制了这个小软件,如果方便的话,可以发一份给我用来学习opensees么?谢谢!

  16. 唐华璇 Reply

    崔老师您好,我需要您开发的这个截面可视化软件,求分享!谢谢崔老师!

  17. Nikolas Reply

    崔博士您好,希望能够下载您的软件,感谢!

  18. Abbas Reply

    Dear Dr. Cui,
    I would appreciate it if you share the software with me as well. I will use it to learn Opensees.

    • CJD Post authorReply

      I cant send the software to your gmail. It was blocked by your gmail. Do you have another email?

  19. M. John Reply

    崔博士您好,感谢您的工作,想要一份该软件用于学习,谢谢

  20. Albert Reply

    崔博士您好,感谢您开发截面可视化程序!

  21. 曹晓罗 Reply

    刚学习Opensees,看到有网上有人在用,慕名而来,希望能下载您的软件Fiber Section Visible,谢谢崔博士!

  22. jiangjindou Reply

    崔博士您好,希望能够用一下您开发的这款纤维截面可视化工具,非常感谢!

  23. FENG Reply

    太棒了,谢谢崔博士,方便对纤维单位划分,希望能分享一下

  24. 王子昭 Reply

    崔博士,希望可以用您的这个软件,非常感谢

  25. dark8am Reply

    请问能麻烦崔博士发一下软件吗,非常感谢您,麻烦您了!

  26. song Reply

    太棒了,谢谢崔博士,希望能用下,非常感谢!

  27. 小米 Reply

    崔博士,亲我跟能发一份给我吗,感谢

    • 小磊 Reply

      崔博士,希望能够用到您开发的截面可视化程序。感谢。

  28. 郁宇琪 Reply

    需要这个软件,谢谢崔博士开发,非常感谢🙏

  29. 贾振雷 Reply

    居然可以可视化,太棒啦,希望能够用一下,非常感谢!

  30. 郭宇 Reply

    崔博士您好,我需要这个新版的Opensees截面工具箱,希望能得到您的分享

Leave a Reply to zzwei Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.