[工具][软件]OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]

实干、实践、积累、思考、创新。


一直想更新这个软件,这款软件最早在2017年开发出来的时候,算是全网唯一的opensees的纤维截面工具,最近终于可以抽时间进一步对这个软件进行更新。

  • 程序图标 ( Program Icon )

  • 程序介绍 ( Program Introduction)

OpenSees纤维截面可视化工具 (OpenSees Fiber Section Viewer)。程序基本功能是,解析OpenSees的.tcl文件,提取其中的纤维截面,显示具体的纤维截面剖分情况。OpenSees Fiber Section Viewer is a visualization program for fiber secion in OpenSees.

编写这个程序的主要目的是,由于很多.tcl文件编写时,纤维截面的定义采用的是 OpenSees 提供的path和layer命令,这些命令容易编写却不方便查看,难以检查具体的纤维截面剖分是否正确。尤其是在阅读别人编写的 .tcl 文件时,由于编写命令的习惯不同,更加难以检查 纤维截面的定义是否合理。因此,如果有一个程序能将OpenSees的fiber、path和layer命令解析出来,并形成纤维图形直观显示,将大大提高初学者阅读和检查.tcl文件的效率,本博文提供的这个小程序很好的解决了这个问题。The main purpose of writing this program is that when many .tcl files are written, the definition of fiber cross-section uses the path and layer commands provided by OpenSees. These commands are easy to write but inconvenient to view, and it is difficult to check whether the specific fiber cross-section is correct. . Especially when reading .tcl files written by others, it is more difficult to check whether the definition of fiber cross-section is reasonable due to the different habit of writing commands. Therefore, if there is a program that can parse the fiber, path and layer commands of OpenSees and form a visual display of fiber graphics, it will greatly improve the efficiency of beginners reading and checking .tcl files. This small program provided in this blog post is very good. solved this problem.

  • 程序更新 ( Program Update)

旧版的纤维截面可以在这个连接查看:http://www.jdcui.com/?p=5007

新版软件主要做了一下更新:

(1)OpenSees的TCL模型文件中文路径已经支持。

(2)修正了旧版软件部分截面提示“sqrt: DOMAIN error”错误无法进行截面显示的问题

(3)增加了纤维截面图形窗口的交互操作:平移,缩放等

(4)增加了错误提示窗口,若截面某部分定义出错,软件可在错误提示窗口中提示,使用者可根据提示检查相应的纤维截面定义命令。

(5)对于部分纤维定义错误的部分,如果纤维坐标没问题,会在图形中以交叉的方式显示,使用者可很清楚检查哪部分命令是错误的。

  • OpenSees中的纤维截面命令 ( Fiber Section Command in OpenSees )

OpenSees中的纤维截面如下所示,摘自 http://opensees.berkeley.edu/wiki/index.php/Fiber_Section

This commnand allows the user to construct a FiberSection object. Each FiberSection object is composed of Fibers, with each fiber containing a UniaxialMaterial, an area and a location (y,z). The command to generate FiberSection object contains in { } the commands to generate all the fibers in the object. To construct a FiberSection and populate it, the following command is used:

section Fiber $secTag <-GJ $GJ> {
fiber…
patch…
layer…

}

$secTag      unique tag among sections
$GJ              linear-elastic torsional stiffness assigned to the section (optional, default = no torsional stiffness)
fiber…        command to generate a single fiber
patch…       command to generate a number of fibers over a geometric cross-section
layer…        command to generate a row of fibers along a geometric-arc

NOTES:

The command to generate a FiberSection contains in { } the commands to generate all the fibers in the section.
The patch and layer commands can be used to generate multiple fibers in a single command.
In an element recorder you can ask a FiberSection for its ‘deformations’, ‘forces’, ‘forceAndDeformation’, ‘fiber $fiberNum $matArg1 ..’, ‘fiber $yLoc $zLoc $matTag $matArg1 ‘

——— from http://opensees.berkeley.edu/wiki/index.php/Fiber_Section

纤维截面的定义主要有三个命令: fiber, path和layer。OpenSees纤维截面可视化工具可支持对这三种命令进行解析。

fiber 命令:

patch 命令:

layer 命令:

  • 程序展示 ( Program Gallery)

Fiber Section Reinforced Concrete Section – Rectangular Symmetric Section, Confined Concrete Core

Fiber Section AISC Standard W Section

Fiber Section Reinforced Concrete Hollow Section

Fiber Section 工字钢

Fiber Section Reinforced Concrete Section – Circular Section

  • 下载 ( Downloads )

(  软件是免费的,如果需要这个软件,在评论区留下您的评论,软件会发送到您的评论邮箱,敬请尊重劳动成果 !!)  


You already voted!

  • 相关话题 ( Related Topics)

[01]. [Tool] OpenSees Material Test (OpenSees单轴材料测试工具)

[02]. OpenSees Steel01 Material Test

[03]. OpenSees Steel02 Material Test

[04]. OpenSees RambergOsgoodSteel Material Test

[05]. OpenSees Concrete01 Material Test

[06]. OpenSees Concrete02 Material Test

[07]. OpenSees Concrete04 Material Test

[08]. OpenSees ConcreteD Material Test

[09]. OpenSees Concrete06 Material Test

[10]. [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]

[11]. [科研][OpenSees] BWBN Material (Pinching Hysteretic Bouc-Wen Material) Test

[12]. [科研][OpenSees] BoucWen Material Test

[13]. [OFSV][案例][OpenSees] OSFSV: OSFiberSectionViewer提示“sqrt: DOMAIN error”错误的解决办法!!

[14]. [笔记][非线性][OpenSees] 多个单轴二折线非线性本构并联是什么样子的?

[15]. [科研][软件][OpenSees] OSBWTest: OpenSees BoucWen Material Test ( OpenSees BoucWen材料测试)

  • 微信公众号 ( Wechat Subscription)

WeChat_QRCode

欢迎关注 “结构之旅” 微信公众号

385 thoughts on “[工具][软件]OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]

  1. zhen Reply

    崔博士您好,最近在使用OpenSees,想试用下你的程序。

  2. 张凯林 Reply

    你好,崔博士,您的软件会对我有很大帮助,希望可以使用您的软件,谢谢。

  3. 张凯林 Reply

    你好,崔博士,您做的软件会对我有很大帮助,希望可以使用您的软件,谢谢。

  4. 赵岩 Reply

    崔博士,非常希望能够下载您的软件,能发一份吗?感谢

  5. 刘先生 Reply

    崔博士,非常希望能够下载您的软件学习Opensees用,可以发给我一份吗?感谢

  6. tuckkson Reply

    崔博士您好,最近在学习opensees纤维模型的自复位桥墩研究,想下载您的软件,谢谢

  7. 史佩然 Reply

    崔博士,目前毕业论文在用Opensees,非常需要您的软件,麻烦能发一下吗

  8. 焦焦 Reply

    崔博士,希望能够下载您的软件,可以发一份吗,非常感谢

  9. 何佳 Reply

    崔老师,非常感谢您能分享一份软件,谢谢

    • Reply

      感谢崔博士!非常希望您能分享这份软件!谢谢!

  10. 吕涛 Reply

    崔博士您好,我目前正在学习OpenSees,非常希望能使用您的软件,可以发一份吗,万分感谢!

  11. WZ WU Reply

    崔博士,我现在正在学习OPENSEES,希望能下载您的软件

  12. 小眼睛 Reply

    崔博士你好,希望能够借鉴一下您的研究成果,可以发一份吗?万分感谢

  13. Andy Reply

    崔博士你好,希望能下载您的软件进一步学习。

  14. xu wang Reply

    感谢崔博士,非常希望能够下载您纤维可视化软件!

  15. zhousheng Reply

    崔博士您好,我正在学习opensees软件,希望能使用您的软件,万分感谢

  16. 孙龙攀 Reply

    崔博士,我最近正在学习opensees,非常希望能够使用您的软件,可以发送给我一份嘛,很感谢

  17. Long Reply

    崔博士您好,希望能使用到您的纤维截面可视化软件,助力科研!

  18. LGT Reply

    感谢崔博士,希望能下载您的软件帮助学习

  19. XIA Y Reply

    崔博士,我最近刚接触OpenSEES,恰巧对纤维截面划分不大理解,希望通过下载您的纤维可视化软件加深学习,感谢感谢!

  20. Riggie Reply

    崔博士您好,我正在学习opensees软件,希望可以下载您的软件,增加对纤维截面的认识,感谢!

  21. 张永强 Reply

    崔博士,您好,我是Opensees初学者,想下载您的软件学习,谢谢

  22. TH Reply

    崔博士您好,希望能够下载您的软件,感谢

  23. 李阳 Reply

    崔博士,在自己定义纤维截面的时候容易出错,如果能下载您的软件纠正模型错误,那将加快模型的建立速度并且减小错误率。非常希望您能分享软件,谢谢!

  24. 王宇轩 Reply

    崔博士您好!我目前刚开始学习opensees,目前做出的模型承载力方面与试验有些出入,想参考您的软件来检查模型,希望获得您的帮助,谢谢!

  25. 张思贤 Reply

    崔博士您好,我正在学习Opensees,非常希望能够得到您的软件进行进一步学习,感谢!

  26. David Reply

    感谢崔博士,希望能够下载您的软件!

  27. 李亚林 Reply

    崔博士,我正在学习OpenSees软件,对于纤维截面划分理解不深刻,希望能够下载您的纤维可视化软件,感谢感谢!

  28. Zihan Tan Reply

    崔博士,非常希望能下您的软件,能发一份嘛?

  29. 梁家栋 Reply

    崔博士,希望能够下载您的软件,可以发一份吗?谢谢您

  30. 杨思伟 Reply

    崔博士,非常希望能够下载您的软件,能发一份吗?感谢

Leave a Reply to 王宇轩 Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.