[工具][软件]OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]

实干、实践、积累、思考、创新。


一直想更新这个软件,这款软件最早在2017年开发出来的时候,算是全网唯一的opensees的纤维截面工具,最近终于可以抽时间进一步对这个软件进行更新。

  • 程序图标 ( Program Icon )

  • 程序介绍 ( Program Introduction)

OpenSees纤维截面可视化工具 (OpenSees Fiber Section Viewer)。程序基本功能是,解析OpenSees的.tcl文件,提取其中的纤维截面,显示具体的纤维截面剖分情况。OpenSees Fiber Section Viewer is a visualization program for fiber secion in OpenSees.

编写这个程序的主要目的是,由于很多.tcl文件编写时,纤维截面的定义采用的是 OpenSees 提供的path和layer命令,这些命令容易编写却不方便查看,难以检查具体的纤维截面剖分是否正确。尤其是在阅读别人编写的 .tcl 文件时,由于编写命令的习惯不同,更加难以检查 纤维截面的定义是否合理。因此,如果有一个程序能将OpenSees的fiber、path和layer命令解析出来,并形成纤维图形直观显示,将大大提高初学者阅读和检查.tcl文件的效率,本博文提供的这个小程序很好的解决了这个问题。The main purpose of writing this program is that when many .tcl files are written, the definition of fiber cross-section uses the path and layer commands provided by OpenSees. These commands are easy to write but inconvenient to view, and it is difficult to check whether the specific fiber cross-section is correct. . Especially when reading .tcl files written by others, it is more difficult to check whether the definition of fiber cross-section is reasonable due to the different habit of writing commands. Therefore, if there is a program that can parse the fiber, path and layer commands of OpenSees and form a visual display of fiber graphics, it will greatly improve the efficiency of beginners reading and checking .tcl files. This small program provided in this blog post is very good. solved this problem.

  • 程序更新 ( Program Update)

旧版的纤维截面可以在这个连接查看:http://www.jdcui.com/?p=5007

新版软件主要做了一下更新:

(1)OpenSees的TCL模型文件中文路径已经支持。

(2)修正了旧版软件部分截面提示“sqrt: DOMAIN error”错误无法进行截面显示的问题

(3)增加了纤维截面图形窗口的交互操作:平移,缩放等

(4)增加了错误提示窗口,若截面某部分定义出错,软件可在错误提示窗口中提示,使用者可根据提示检查相应的纤维截面定义命令。

(5)对于部分纤维定义错误的部分,如果纤维坐标没问题,会在图形中以交叉的方式显示,使用者可很清楚检查哪部分命令是错误的。

  • OpenSees中的纤维截面命令 ( Fiber Section Command in OpenSees )

OpenSees中的纤维截面如下所示,摘自 http://opensees.berkeley.edu/wiki/index.php/Fiber_Section

This commnand allows the user to construct a FiberSection object. Each FiberSection object is composed of Fibers, with each fiber containing a UniaxialMaterial, an area and a location (y,z). The command to generate FiberSection object contains in { } the commands to generate all the fibers in the object. To construct a FiberSection and populate it, the following command is used:

section Fiber $secTag <-GJ $GJ> {
fiber…
patch…
layer…

}

$secTag      unique tag among sections
$GJ              linear-elastic torsional stiffness assigned to the section (optional, default = no torsional stiffness)
fiber…        command to generate a single fiber
patch…       command to generate a number of fibers over a geometric cross-section
layer…        command to generate a row of fibers along a geometric-arc

NOTES:

The command to generate a FiberSection contains in { } the commands to generate all the fibers in the section.
The patch and layer commands can be used to generate multiple fibers in a single command.
In an element recorder you can ask a FiberSection for its ‘deformations’, ‘forces’, ‘forceAndDeformation’, ‘fiber $fiberNum $matArg1 ..’, ‘fiber $yLoc $zLoc $matTag $matArg1 ‘

——— from http://opensees.berkeley.edu/wiki/index.php/Fiber_Section

纤维截面的定义主要有三个命令: fiber, path和layer。OpenSees纤维截面可视化工具可支持对这三种命令进行解析。

fiber 命令:

patch 命令:

layer 命令:

  • 程序展示 ( Program Gallery)

Fiber Section Reinforced Concrete Section – Rectangular Symmetric Section, Confined Concrete Core

Fiber Section AISC Standard W Section

Fiber Section Reinforced Concrete Hollow Section

Fiber Section 工字钢

Fiber Section Reinforced Concrete Section – Circular Section

  • 下载 ( Downloads )

(  软件是免费的,如果需要这个软件,在评论区留下您的评论,软件会发送到您的评论邮箱,敬请尊重劳动成果 !!)  


You already voted!

  • 相关话题 ( Related Topics)

[01]. [Tool] OpenSees Material Test (OpenSees单轴材料测试工具)

[02]. OpenSees Steel01 Material Test

[03]. OpenSees Steel02 Material Test

[04]. OpenSees RambergOsgoodSteel Material Test

[05]. OpenSees Concrete01 Material Test

[06]. OpenSees Concrete02 Material Test

[07]. OpenSees Concrete04 Material Test

[08]. OpenSees ConcreteD Material Test

[09]. OpenSees Concrete06 Material Test

[10]. [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]

[11]. [科研][OpenSees] BWBN Material (Pinching Hysteretic Bouc-Wen Material) Test

[12]. [科研][OpenSees] BoucWen Material Test

[13]. [OFSV][案例][OpenSees] OSFSV: OSFiberSectionViewer提示“sqrt: DOMAIN error”错误的解决办法!!

[14]. [笔记][非线性][OpenSees] 多个单轴二折线非线性本构并联是什么样子的?

[15]. [科研][软件][OpenSees] OSBWTest: OpenSees BoucWen Material Test ( OpenSees BoucWen材料测试)

  • 微信公众号 ( Wechat Subscription)

WeChat_QRCode

欢迎关注 “结构之旅” 微信公众号

385 thoughts on “[工具][软件]OSFSV v2021: OpenSees Fiber Section Viewer [OpenSees纤维截面可视化工具]

  1. 申士宇 Reply

    您好崔博士,我是一名土木工程专业的研究生,最近在学组合柱相关模拟,麻烦您发一份小程序到我邮箱,谢谢您

  2. 孙耀宇 Reply

    崔博士您好,感谢您在OpenSees软件应用及可视化方面做的工作,让我这个OpenSees初学者收获良多,期待收到您的软件,谢谢

  3. freeloop Reply

    崔博士您好,希望收到您的软件,感谢分享

  4. 张俊 Reply

    崔博士您好,目前正在做桥梁抗震分析,关于桥墩纤维截面的划分,非常希望能获取您这个软件,感谢!

  5. 广新潮 Reply

    崔博士您好,希望你可以分享这个软件,再次感谢!

  6. 何永康 Reply

    谢谢崔博士,我非常需要这个软件,谢谢您!

  7. 王辉 Reply

    崔博,你好,刚学习opensees,请分享一份软件。

  8. Liu Reply

    崔博士您好,十分感谢您在OS方面做的努力,新版OSFSV对初学者有很好的辅助作用,希望可以获取您的软件

  9. 李白 Reply

    崔博士您好,您在os方面的贡献是举世瞩目的,希望得到软件的支持1

  10. 王若昕 Reply

    崔博士您好,希望能收到您的软件,十分感谢

  11. 魏佳琪 Reply

    崔博士您好,我目前正在学习opensees钢结构中纤维截面的划分,觉得您这个程序对我非常有帮助,求分享!

  12. 赵健辰 Reply

    强啊崔博士!入坑OpenSEES就是从您这里开始的!希望能收到您这个软件,感谢!

  13. 蔡欣爽 Reply

    崔博士,非常感谢您的分享,希望能获得您分享的软件!

  14. T Reply

    崔博士,您好!感谢您的分享,希望获得您的软件

  15. 李魁 Reply

    崔博士您好,能否发我一份这个软件。感谢!

  16. 夏宇 Reply

    尊敬的崔博士您好!希望收到您的软件。

  17. shirley Reply

    崔博士,您好,我目前用opensees做混凝土柱的模拟,您开发的这个可视化小程序能够帮助我们提升建模和纠错的效率,您方便的话可以发我一个吗,非常感激您的分享!

  18. 胡博 Reply

    崔博士你好,从你的网站学到了很多有用的干货,纤维截面的可视化能够给我们带来非常大的便利和帮助,方便的话可以分享一下这个可视化软件吗?十分感谢!

  19. 刘家齐 Reply

    崔博士,您好!跟着您学习了很多有限元的知识,麻烦您分享下这个可视化软件吧!非常感谢崔博士!

  20. 韩伟 Reply

    崔博士您好,我从您这学习到很多实用知识,方便分享一下软件吗,非常感激

  21. 刘伟 Reply

    崔博士,您好!非常感谢您的分享吗,请问软件可以发我一下吗?谢谢您!

  22. 刘欣林 Reply

    崔博士,你好!希望下载您的软件,可以发一份吗?感谢

  23. 孟杰 Reply

    崔博士你好,我正在学习Opensees,希望能用你的软件助力我学习。还请您抽空发送给我一份,谢谢了!

  24. Reply

    崔博士,您好 希望收到您的软件。谢谢!

  25. Eric Reply

    崔博士太强了,能麻烦发一下我吗,非常感谢

  26. houyubing Reply

    崔博士,十分希望能够收到您的软件学习,万分感谢

  27. owen.p Reply

    崔博士您好,十分希望收到您的软件进行学习,十分感谢

  28. Micheal-Cai Reply

    崔博士,您好,我目前在做opensees组合柱的模拟,您开发的这个可视化小程序无疑能够帮助我们提升建模和纠错的效率,您方便的话可以发我一个么,非常感激您了!

  29. 王皓 Reply

    崔博士您好,我目前也在学习OpenSEES的初级阶段,对您开发的工具很感兴趣,希望您能够分享,十分感谢!

  30. H Reply

    崔博士,感谢您的分享,希望能获得您的软件!

Leave a Reply to H Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.