[PERFORM-3D][Tool] 混凝土柱(带保护层)纤维截面工具 [Tool for Column Inelastic Fiber Section]

同样是应网友的要求,增加一个考虑保护层的纤维柱截面剖分工具,用处不太大,也放上来和大家分享。这些小工具主要是方便研究,学习软件,做软件测试用的。对于初学PERFORM-3D的同学可以看看。

 A small program to share with you.

  • 程序图标 ( Program Icon )

           

程序介绍 ( Program Introduction)

针对PERFORM-3D软件的RC柱截面(带保护层)剖分小工具。程序通过导入文本参数(.csv),直接生成纤维截面的参数,并导出PERFORM-3D需要的二进制文件(.PF3CMP)。然后通过PERFORM-3D导入.PF3CMP文件完成繁琐的纤维截面输入工作,节省你的时间。

This program is used for the data input of the “Inelastic Fiber Column Section” in PERFORM-3D. Through the import of section properties in text format (.csv), the program can generate the fiber section properties automatically. And then, the program export the binary data input file (.PF3CMP) for “Inelastic Fiber Column Section” which PERFORM-3D can then read to complete the fiber section definition. This program will definitely save you time on the input of the structural fibers. 

  • 程序界面 ( Program Interface )

  • 程序说明 ( Program Help )

 程序的使用步骤:

(1)填写纤维截面文本参数。

(2)导入参数文本文件,检查纤维截面数据。

(3)导出纤维截面二进制文件。

(4)打开PERFORM-3D,导入二进制文件,完成纤维截面定义。

The overall steps are as follows.

(1) Prepare section properties in text format.

(2) Import the text file and check the fiber section properties generated by the program.

(3) Export the binary data input file (.PF3CMP) for “Inelastic Fiber Shear Wall Section”.

(4) Open PERFORM-3D and import the binary data input file to complete the definition of the fiber section properties .

  • 程序下载 ( Program Download )

非免费 程序,暂不提供下载。)

  • 注释 ( Comments )

  (如果你发现软件有bug或者软件使用有问题,请联系我!邮箱:jidong_cui@163.com)

  ( If  you have found any bug in the program or have any problem when using the program, please don’t hesitate to contact me directly.  Email : jidong_cui@163.com)

You already voted!

  • 微信公众号 ( Wechat Subscription)

WeChat_QRCode

欢迎关注 “结构之旅” 微信公众号,及时订阅更新

 

27 thoughts on “[PERFORM-3D][Tool] 混凝土柱(带保护层)纤维截面工具 [Tool for Column Inelastic Fiber Section]

  1. yingzi Reply

    崔博士,有没有perform 3d软件学习视频?

  2. 王浩楠 Reply

    崔博士,可以分享一下吗,感激不尽

  3. Hasan Reply

    Hi,
    I am preparing master thesisis.Can you share with me your programme?

  4. Ismail Reply

    Dear CJD,

    Your work looks promising and likely unique.
    I need this program for my thesis. Could you send me a copy of this program?

    Much thanks

  5. Paul Reply

    Hello, could you please send me a copy of this program?

    thanks!

  6. Ersin Reply

    Hello,

    İ am preparing master thesis and i need your programme to prepare my perform 3d model
    Can ypu share with me your small programme?
    thank you

    ersin

  7. gokhan Reply

    Hello,

    Thank you for your studies.Can i get this program please?

  8. 小混蛋闯江湖 Reply

    崔博士,您好,不支持免费下载,可以怎么样得到这个小程序呢~谢谢

  9. Ahmet Reply

    Dear Cui,

    I also need your this software. I will short my thesis quite.

    I hope you can help me.

  10. 田会文 Reply

    崔博士您好,我是东南大学研二学生,在做一个大型工程弹塑性分析,需要定义大量纤维截面,能否发我邮箱一份软件,谢谢您。

    • CJD Post authorReply

      暂不免费提供,大工程,建议去找接口来做会方便点。

  11. jinsong Reply

    我也是最近买了您的书,但是没有这个工具截面离散起来太费劲了,求发送一份到我邮箱,

  12. Yangfuwen Reply

    崔博士你好,我最近在写毕业论文,需要用perform-3d,您能否发我一个小程序,谢谢!

  13. chong Reply

    崔老师能将这个软件发给我吗,谢谢您

  14. Cu_Messi Reply

    崔博士,您好!

    我最近在做一个超限的perform-3d项目,由于结构复杂、构件众多,前处理工作量比较大。在此,恳请崔博士能把您的小工具发给我,以求能提高建模效率。

    拜谢!

    • CJD Post authorReply

      已经发送到你的邮箱,这两天实在太忙,太忙,没时间处理评论 和 回复邮件。

  15. Kirk Charles Reply

    Could you lease send me a copy of the file.

    thank you

  16. suihonglau Reply

    崔博士,您好,您是否可以给我发一份这个小程序,谢谢

  17. 李广洲 Reply

    崔博士,您好,希望您能发一份这个小程序给我,谢谢。上一个邮箱写错了,不好意思。

  18. 李广洲 Reply

    崔博士,您好,我想要一份这个小程序,希望您能发给我一份,谢谢。

Leave a Reply to CJD Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.