OpenSees RambergOsgoodSteel Material Test

关于 RambergOsgoodSteel Material 材料的信息参考 RambergOsgoodSteel Material。这里也顺便测试一下。

  • 材料参数(Material Parameters

Fy:屈服强度(yield strength);

E0:初始弹性模量(initial elastic tangent);

a:屈服时残余应变,通常取0.002("yield offset" and commonly used value for a is 0.002);

n:控制从弹性段向塑性段过度的参数,同时,当增大n时材料的强化速率会降低,通常取大于等于5(parameter to control the transition from elastic to plastic branches. And controls the harding of the material by increasing the "n" harding ratio will be decreased. Commonly used values for n are 5 or greater)。

  • 测试(Test

ro-material

ro

  • 参考(References

[1] RambergOsgoodSteel Material

  • 程序下载 ( Program Download )

[Tool][软件] OpenSees Material Test [OpenSees单轴材料测试工具]

PS. 程序免费下载 ,欢迎大家给我提意见 ,敬请尊重劳动成果

  • 相关话题 ( Related Topics)

[1] OpenSees Concrete06 Material Test

[2] OpenSees ConcreteD Material Test

[3] OpenSees Concrete04 Material Test

[4] OpenSees Concrete02 Material Test

[5] OpenSees Concrete01 Material Test

[6] OpenSees RambergOsgoodSteel Material Test

[7] OpenSees Steel02 Material Test

[8] OpenSees Steel01 Material Test

You already voted!

4 thoughts on “OpenSees RambergOsgoodSteel Material Test

  1. zero Reply

    崔老师,您好。有个想请教一下您:针对已知应变求解应力的问题,对于R-O模型是否只能插值求解,有没可能写出解析式的形式呢?也就是把函数从 应变=F(应力)这种形式,改写为应力=F(应变)的形式。
    这个问题困扰我很久,冒昧地留言请教一下。

    • CJD Post authorReply

      对于滞回模型,除了极少数的模型是能用你说的这种应变=F(应力)函数显示给出来之外,大部分情况都无法这么给出来的。或者说,通常用应变=F(应力)数学公式只是给出骨架或者给出某一段的公式。通过一整个应变=F(应力)公式显式表达出整个复杂滞回基本上没有的。所以对于实际材料本构,通常里面都会涉及到很多的判断,基于历史应变(通常是上一步应变)及当前应变,去判断材料是处于加载还是卸载等等,部分材料还涉及多个历史变量,然后进一步获得当前抗力及切线刚度。另外还有些复杂本构还涉及材料内部的迭代。这个可以直接看看opensees的代码,找个最简单的材料的本构实现来看看就知道了,比如steel01的,就是最简单的了。

Leave a Reply to zc Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.