Abaqus / Earthquake Engineering [地震工程] / FEM Analysis of Structural Components [构件有限元模拟] / Paper [论文] / Reinforced Concrete [钢筋混凝土] / Structural Analysis [结构分析] / Structural Engineering [结构工程]

[论文][Paper]基于试验的ABAQUS混凝土塑性损伤参数取值方法(Determination of Damage Parameter of ABAQUS CDP Model Based on Test Data)

在ABAQUS的混凝土塑性损伤本构中,塑性损伤参数是影响钢筋混凝土构件行为的重要参数,其取值不仅影响卸载或反向加载的刚度,且直接对构件应变成分有很大影响.对国内外多组混凝土单轴往复压、拉试验数据进行统计分析及数据拟合,提出了一种新的塑性损伤参数的取值方法.与其他方法的比较及数值试验均表明,该方法能较准确地反映真实的混凝土退化特性,并且相对于其他损伤参数取值方法形式更为简洁,便于使用.

Earthquake Engineering [地震工程] / Finite Element Method [有限元法] / Paper [论文] / Performance Based Seismic Design [抗震性能设计] / Reinforced Concrete [钢筋混凝土] / Structural Analysis [结构分析] / Structural Engineering [结构工程]

[论文][Paper]Deformation Limits of L-Section RC Shear Walls (L形RC剪力墙的变形指标)

In order to establish the relation between damage state and member deformation of the L-section RC shear wall, 216 FE models designed to meet the requirements of the Chinese codes were set up. The analysis fully considers the variation of parameters including axial load ratio and shear span ratio etc. According to the results, criteria of classifying failure modes of L-section RC shear walls are proposed. Failure modes are determined by shear-span ratio, moment-shear ratio and end columns’ reinforcement ratio. Deformation limits corresponding to respective performance levels are put forward. Fitted formulas of calculating the limits are also presented. It is shown that the categorization criteria are reliably accurate in predicting failure modes. Deformation limits of a given L-section RC shear wall could be determined via axial load ratio and moment-shear ratio. The fitted formulas possess a satisfactory correlation with numerical results.