Skip to content

崔济东的博客 - JiDong Cui's Blog

结构工程博士 结构工程师 伪程序员 技术民工 建筑结构 抗震设计 性能设计 弹塑性 编程 软件开发 有限元 超高层 超限设计 爱生活 爱思考 爱超越 爱挑战 爱尝试新事物 梦想做个斜杠青年

Menu
  • Home
  • [强震-选波]
  • [自编软件]
    • 自编软件汇总
    • ENGT: Engineering Tookit [建筑结构辅助设计工具集成系统]
    • SDOS: Structural Design Optimization System [结构设计优化系统]
    • Midas2Abaqus: Midas2Abaqus 模型转换工具
    • P3D-POST: PEROFRM-3D Post [PERFORM-3D 后处理系统]
    • OS-PrePost: OpenSees Pre & Post Processor [OpenSees 前后处理系统]
    • BeamEvelopes: Continuous Beam Envelope Analysis Program [连续梁包络分析工具]
    • GMS – Ground Motion Selection Program [强震记录选取程序]
    • GML – Ground Motion Library Management [强震记录管理软件]
    • SPECTR – A program for Response Spectra Analysis [SPECTR反应谱计算程序]
    • GMP – A tool for Calculating Earthquake Intensities for Seismic Analysis of Structures [结构抗震分析地震动强度指标计算工具]
    • CADtoXTRACT 插件 – AutoCAD转任意XTRACT截面
    • YTP – A Pre Process Program for PERFORM-3D [YTP Perform-3D前处理程序]
    • NGA Convertor – PEER NGA Ground Motion Convertor [PEER地震波数据格式转换器]
    • GMS Converter – 地震波通用格式转换器[ General Formats Transformer for Earthquake Records]
    • HLA – Hysteretic Loop Analysis Program [HLA滞回环分析工具]
    • [科研小工具] 力-位移累积耗能计算[Force-Displacement Cumulative Dissipated Energy Calculator ]
    • [软件]Mander Confined Strength Ratio Calculator[Mander混凝土本构约束强化系数]
    • [试验][研究][小工具][编程] YPD:Yielding Point & Ductility [等效屈服点和延性计算]
    • [科研][工具][Research] 反应谱拟合及反应谱特征参数提取工具 [A tool for fitting response spectrum and extracting response spectrum parameters]
    • [风洞试验][结构设计][软件] RWDI风洞试验荷载数据处理工具
  • [软件笔记]
    • YJK盈建科 学习笔记
    • PERFORM-3D 学习笔记
    • OpenSees 学习笔记
    • Abaqus 学习笔记
    • SAP2000 学习笔记
    • MATLAB 学习笔记
    • Revit 学习笔记
    • AutoCAD 学习笔记
    • Rhino 学习笔记
    • Midas 学习笔记
    • HyperMesh 学习笔记
    • 学习笔记汇总
  • [出版物]
    • Ph.d. Paper [博士论文]
    • [Book][书] 有限单元法：编程与软件应用
    • [Book][书] PERFORM-3D Theory and Tutorials [PERFORM-3D原理与实例]
    • 文献汇总
  • [编程]
  • [PERFORM-3D]
  • [有限元]
    • [Book][书] 有限单元法：编程与软件应用
    • Finite Element Programming [有限元 编程]
    • FEM Analysis of Structural Components [构件有限元模拟]
    • Finite Element Method [有限元法]
  • [结构优化]
  • [分类]
    • Performance Based Seismic Design [抗震性能设计]
    • Dynamics [动力学]
    • Earthquake Engineering [地震工程]
    • Solid Mechanics [固体力学]
    • Reinforced Concrete [钢筋混凝土]
    • Structural Engineering [结构工程]
    • Structural Design [结构设计]
    • Structural Analysis [结构分析]
    • Math & Geometry [数学与几何]
    • Working Drawings [施工图]
    • Game [游戏]
    • 父亲的书法与诗词 [My father’s Calligraphy and Poems]
  • [科研]
    • Publications [出版物]
    • Ph.d. Paper [博士论文]
    • [Earthquake Ground Motion Selection Service] 强震记录选取(选波)服务
    • 钢筋混凝土构件拟静力试验数据库 [Database of RC Specimens under Quasi-Static Loading]
  • [工程]
  • [教程]
    • [Book][书] 有限单元法：编程与软件应用
    • [Book][书] PERFORM-3D Theory and Tutorials [PERFORM-3D原理与实例]
  • [日记]
  • [链接]
  • [捐助]
  • [关于]
    • About me [博主]
    • Research Group[研究小组]
  • [访客]

Month: December 2016

Math & Geometry [数学与几何] / Structural Engineering [结构工程]

Catenary（悬链线）

悬链线（Catenary）是一种曲线，它的形状与悬在两端的绳子因均匀引力作用下掉下来之形相似。适当选择坐标系后，悬链线的方程是一个双曲余弦函数。（1） 悬链线的基本概念（2） 悬链线的公式推导（3） 悬链线的参数确定思路及数值求解算法

MATLAB / Paper [论文] / Programming [编程]

Excel to MATLAB .mat File

利用MATLAB提供的API，将EXCEL数据转换为MATLAB的.mat文件

WeChat Subscription [微信订阅号]

Log in to WeChat in Discover->Scan QR Code (扫描以下二维码,关注微信订阅号)

Vistor Map [访问者地图]

Search [搜索]

Blog Menu [博客菜单]

  • Home [主页]
  • About Me [博主简介]
  • Publications [出版物]
  • Engineering Project Experience [工程项目经历]
  • [Book][书] PERFORM-3D Theory and Tutorials [PERFORM-3D原理与实例]
  • Softwares Box [自编软件]
  • Donate Website [网站捐助]
  • [Earthquake Ground Motion Selection Service] 强震记录选取(选波)服务
  • 钢筋混凝土构件拟静力试验数据库 [Database of Reinforced Concrete Specimens under Quasi-Static Loading]
  • Softwares Notes [软件笔记汇总]
  • American and European Codes [美欧规范]
  • Structural Optimization [结构优化]
  • Excel & Office Development [Excel & Office 工具开发]
  • CSI Product Plugin [CSI产品插件]
  • FEM Analysis of Structural Components [构件有限元模拟]
  • 父亲的书法与诗词 [Father’s Calligraphy and Poems]
  • Links [友情连接]
  • Guest Book [访客留言]
  • Visitors Map [访问者地图]

Categories [分类]

  • Abaqus (59)
  • Algorithm [算法] (10)
  • American and European Codes [美欧规范] (2)
  • ANSYS (6)
  • AutoCAD (13)
  • Bridge Engineering [桥梁工程] (1)
  • Civil Engineering Test [土木工程试验] (21)
  • Diary [日记] (34)
  • Dynamics [动力学] (46)
  • Earthquake Engineering [地震工程] (119)
  • Earthquake isolation and reduction [隔震减震] (10)
  • Engineering Surveying [工程测量] (1)
  • ETABS & SAP2000 (11)
  • FEM Analysis of Structural Components [构件有限元模拟] (24)
  • Finite Element Method [有限元法] (82)
  • Game [游戏] (7)
  • Geotechnical Engineering [岩土工程] (3)
  • Hydrology [水文学] (2)
  • Lisp (1)
  • Math & Geometry [数学与几何] (30)
  • MATLAB (14)
  • Midas (33)
  • My Software [我的软件] (158)
  • Nonlinear FEM [非线性有限元] (17)
  • Numerical Optimization [数值最优化] (2)
  • OpenSees (11)
  • Painting [绘画] (24)
  • Paper [论文] (13)
  • PERFORM-3D (48)
  • Performance Based Seismic Design [抗震性能设计] (23)
  • PKPM & YJK (59)
  • Programming [编程] (176)
  • Python (2)
  • Reinforced Concrete [钢筋混凝土] (117)
  • Research [科研] (35)
  • SAUSAGE (6)
  • Solid Mechanics [固体力学] (9)
  • Structural Analysis [结构分析] (115)
  • Structural Design [结构设计] (198)
  • Structural Engineering [结构工程] (283)
  • Structural Optimization[结构优化] (5)
  • Structural Wind Engineering [结构风工程] (9)
  • Tensor [张量] (1)
  • Uncategorized (4)
  • Working Drawings [施工图] (6)
  • 岩土力学 [Rock and Soil Mechanics] (3)
  • 父亲的书法与诗词 [My father's Calligraphy and Poems] (8)
  • 电脑技术[Computer Technology] (21)
  • 结构设计规范学习[Structural Design Specification Learning] (27)
  • 钢结构 [Steel Structure] (13)
  • 随笔 (7)

Tag Cloud [标签云]

Abaqus AUTOCAD book ETABS FEM Finite element method MATLAB midas Midas2Abaqus Midas Gen OpenSEES paper PERFORM-3D PERFORM-3D原理与实例 SAP2000 Theory Tool Tutorials YJK 书 二次开发 动力学 原理 反应谱 后处理 地震波 实例 工具 开发 性能设计 有限元 混凝土 盈建科 科研 程序 纤维截面 结构 结构分析 结构设计 绘画 编程 论文 试验 超限设计 软件

Archives [存档]

  • December 2018 (27)
  • November 2018 (9)
  • October 2018 (13)
  • September 2018 (10)
  • August 2018 (20)
  • July 2018 (9)
  • June 2018 (19)
  • May 2018 (23)
  • April 2018 (16)
  • March 2018 (12)
  • February 2018 (10)
  • January 2018 (15)
  • December 2017 (14)
  • November 2017 (14)
  • October 2017 (12)
  • September 2017 (19)
  • August 2017 (17)
  • July 2017 (17)
  • June 2017 (9)
  • May 2017 (17)
  • April 2017 (26)
  • March 2017 (12)
  • February 2017 (3)
  • January 2017 (3)
  • December 2016 (2)
  • October 2016 (1)
  • July 2016 (11)
  • June 2016 (7)
  • May 2016 (8)
  • April 2016 (12)
  • March 2016 (2)
  • February 2016 (3)
  • January 2016 (3)
  • December 2015 (3)
  • November 2015 (7)
  • October 2015 (1)
  • September 2015 (3)
  • August 2015 (7)
  • July 2015 (12)
  • June 2015 (8)
  • January 2015 (4)
  • December 2014 (2)
  • October 2014 (35)

Recent Posts [近期文章]

  • [结构设计][规范]隔震设计简化计算(抗规附录L)
  • [结构设计][规范] 等效侧向力法计算非结构构件地震力 (抗规13.2节)
  • [结构设计][工程][笔记] 什么是规定水平力？
  • 父亲的书法-海纳百川 [My father’s Calligraphy ]
  • [结构设计][方案对比][编程] 多方案整体结果分析对比 (YJK Multi-Model Compare工程应用案例)
  • [结构设计][规范] 什么是重力荷载代表值？
  • [结构设计][钢结构][编程][工具] 钢板剪力墙轴压比计算(Axial Load Ratio of Steel Plate-Concrete Composite Shear Walls)
  • [盈建科][YJK][编程][工具] YJK MultiModel Zip: YJK多模型批量打包工具
  • [结构设计][盈建科][方案][编程] YJK Multi-Model Compare: 基于盈建科的多模型参数优化比选工具 (超限助手)(方案优化比选)
  • [结构设计][超高层][ENGT] YJK 斜墙位移角统计问题 (ENGT超高层应用案例)

Recent Comments [最新评论]

  • CJD on [Tool]Grain size distribution curve [颗粒级配分布曲线]
  • jincong on [Tool]Grain size distribution curve [颗粒级配分布曲线]
  • [结构设计][指标][盈建科] 巨柱倾角对外框剪力分担比的影响 (ENGT 超高层应用案例) | 崔济东的博客 - JiDong Cui's Blog on [结构设计][ENGT][笔记]伸臂及腰桁架对巨柱轴力的影响(ENGT 超高层应用案例)
  • jincong on [Tool]水电工程水工建筑物标准设计反应谱计算程序(NB 35047-2015)
  • makai on [科研][Tool][软件][试验] HLA: Hysteretic Loop Analysis Program [HLA: 滞回环分析]
  • Tang on [结构设计][规范] 什么是重力荷载代表值？
  • CJD on Mander Confined Concrete Model 资料整理
  • Peter Ihn on [Tool] Pushover Performance Point Solution Program [Pushover 分析性能点求解程序][Based on FEMA 440]
  • Peter Ihn on Mander Confined Concrete Model 资料整理
  • 陈 on [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]
  • 陈 on [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]
  • CJD on Donate Website [网站捐助]
  • 头文字M on Donate Website [网站捐助]
  • CJD on [科研][工具][软件] 滞回环骨架曲线提取工具 [Extract Backbone Curve from Hysteretic Loop]
  • CJD on Donate Website [网站捐助]
  • 千帆尽过 on Donate Website [网站捐助]
  • Lemon on [科研][工具][软件] 滞回环骨架曲线提取工具 [Extract Backbone Curve from Hysteretic Loop]
  • CJD on Donate Website [网站捐助]
  • sly on Donate Website [网站捐助]
  • SLY on Donate Website [网站捐助]
  • CJD on SDOS: Structural Design Optimization System [结构设计优化系统]
  • LIUXIN on SDOS: Structural Design Optimization System [结构设计优化系统]
  • CJD on [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]
  • 易恒 on [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具]
  • ekko on [结构设计][盈建科][方案][编程] YJK Multi-Model Compare: 基于盈建科的多模型参数优化比选工具 (超限助手)(方案优化比选)

FRIENDS [友情链接]

  • [01] 陈学伟博士的博客 [弹塑性分析&性能设计]
  • [02] 结构工程师林超伟的博客
  • [03] 徐珂的建筑结构博客 [建筑结构设计]
  • [04] 清溪长河 [桥梁工程]
  • [05] 李华伟的博客 [ ABAQUS ]
  • [06] 鲁班人的博客 [钢结构,ANSYS ]
  • [07] 补国斌博士 [ 结构抗震 ]
  • [08] 昆神的结构博客
  • [09] 崔家春的博客 [专注结构分析]
  • [10] 结构软件学且思 [种菜盖房子研习中医]
  • [11] 卫杰彬的结构博客 [结构与地震工程]
  • [12] 曾明的结构博客 [结构分析与设计]
  • [13] 林煌斌博士的博客 [结构工程]
  • [14] Aaron Yu的知乎 [结构风工程]
  • [15] 陈维晃的博客 [OpenSees, OSLite]

COMPANIES [企业链接]

  • [01] 广州容柏生建筑结构设计事务所 [RBS Architectural Engineering Design Associates]

LINKS [链接]

  • [01] Berkeley Seismo Blog [伯克利地震博客]
  • [02] OpenSees [Open System for Earthquake Engineering Simulation]
  • [03] PEER Ground Motion Database [PEER强震数据库]
  • [04] WELSIM [有限元仿真软件]
  • [05] 建筑一网 [欧美规范&装配建筑]

Calendar [日历]

December 2016
M T W T F S S
« Oct   Jan »
 1234
567891011
12131415161718
19202122232425
262728293031  

Stats [网站统计]

  • Total Stats
    • 1 Author
    • 477 Posts
    • 50 Pages
    • 1,501 Tags
    • 3,654 Comments
    • 1,169 Comment Posters
    • 21 Links
    • 53 Post Categories
    • 3 Link Categories
  • 10 Most Commented Posts
    • [科研][Tool][软件][试验] HLA: Hysteretic Loop Analysis Program [HLA: 滞回环分析] - 524 comments
    • Mander Confined Concrete Model 资料整理 - 308 comments
    • [Tool] OpenSees Fiber Section Viewer [工具][OpenSees纤维截面可视化工具] - 238 comments
    • [软件]Mander Confined Strength Ratio Calculator[Mander混凝土本构约束强化系数] - 174 comments
    • [Tool] Pushover Performance Point Solution Program [Pushover 分析性能点求解程序][Based on FEMA 440] - 148 comments
    • Modified Kent & Park Concrete Model 资料整理 - 112 comments
    • [试验][研究][小工具][编程] YPD:Yielding Point & Ductility [等效屈服点和延性计算] - 85 comments
    • [Tool] PEER NGA Ground Motion Convertor [PEER地震波数据格式转换器] - 80 comments
    • [Software][科研小工具] 力-位移累积耗能计算[Force-Displacement Cumulative Dissipated Energy Calculator ] - 79 comments
    • [Tool] Mander Confined Concrete Model – Confined Strength Ratio [Mander混凝土本构约束强化系数] - 63 comments

Archives [存档]

Categories [分类]

WeChat Subscription [微信订阅号]

Log in to WeChat in Discover->Scan QR Code

(扫描以下二维码,关注微信订阅号)

FRIENDS [友情链接]

  • [01] 陈学伟博士的博客
  • [02] 结构工程师林超伟的博客
  • [03] 徐珂的建筑结构博客
  • [04] 清溪长河
  • [05] 李华伟的博客
  • [06] 鲁班人的博客
  • [07] 补国斌博士
  • [08] 昆神的结构博客
  • [09] 崔家春的博客
  • [10] 结构软件学且思
  • [11] 卫杰彬的结构博客
  • [12] 曾明的结构博客
  • [13] 林煌斌博士的博客
  • [14] Aaron Yu的知乎
  • [15] 陈维晃的博客

Search [搜索]

Copyright © 2018 崔济东的博客 - JiDong Cui's Blog – OnePress theme by FameThemes
This site is protected by WP-CopyRightPro

Donation(捐助)

打开(Reopen)

[1] Gound Motion Selection Services (选波) 服务
[2]《PERFORM-3D原理与实例》 PERFORM-3D Theory and Tutorials 
[3] RC Specimens Database  RC梁柱墙试验数据库
[4] 博士论文 Ph.d. Paper
[5] ENGT: Engineering Tookit  [建筑结构辅助设计工具集成系统]
[6] P3D-POST: PERFORM-3D POST  [PERFORM-3D后处理系统]

打开 Reopen