分享一个小程序。  A small program to share with you.

  • 程序图标 ( Program Icon )

        Pushover Performance Point Solution Program(based on FEMA 440 Equivalent Linearization Method )

  • 程序介绍 ( Program Introduction)

基于FEMA 440等效线性化法 Pushover分析方法 的性能点求解程序。( A program for the Solution of Pushover Performance Point based on FEMA 440 Equivalent Linearization Method. )

  • FEMA 440等效线性化方法介绍 ( Introduction of FEMA 440 Equivalent Linearization Method )

FEMA 440等效线性化方法是众多Pushover分析方法中的一种,是ATC-40能力谱法(Capacity-Spectrum Method )的一种改进,其基本原理如下图所示。( Equivalent linearization procedure of FEMA 440  is a modification to the Capacity-Spectrum Method (CSM) of ATC-40. )

When equivalent linearization is used as a part of a nonlinear static procedure that models the nonlinear response of a building with a SDOF oscillator, the objective is to estimate the maximum displacement response of the nonlinear system with an “equivalent” linear system using an effective period, Teff, and effective damping, βeff (see Figure above). The global force-deformation relationship shown in the above figure for a SDOF oscillator in acceleration-displacement response spectrum (ADRS) format is termed a capacity curve. The capacity curve shown in the above figure is developed using the conventional procedures of FEMA 356 or ATC-40. The effective linear parameters are functions of the characteristics of the capacity curve, the corresponding initial period and damping, and the ductility demand, µ

——— from FEMA 440

  • 程序界面 ( Program Interface )

About_PushoverFEMA440_Program_Interface

  • 实例 ( Example )

(1) Import Push Over Data

(2) Generate Capacity Curve

(3) Set Demand Curve

(4) Solution of Performance Point


46 2

  • 注释 ( Comments )

  ( 软件是免费的。如果有需要,请在评论栏留下您的评论,软件将通过邮箱给您发送。如果你发现软件有bug或者软件使用有问题,请联系我!邮箱:jidong_cui@163.com . 如果你喜欢,请在上面给我 点个赞 吧! :-)   :-)   :-)

  ( This app is free . If  you have found any bug in the program or have any problem when using the program, please don’t hesitate to contact me directly.  Email : jidong_cui@163.com. If you like this posts, please give me a thumbs up rating on the above button!)

  • 特别鸣谢 ( Acknowledgements)

特别鸣谢来自中国建筑科学研究院的 张茜 博士 !!!( Special thanks to Dr. Xi Zhang from China Academy of Buidling Research!!! )

  • 相关话题 ( Related Topics)

[01]  [Tool]中国规范反应谱生成程序 [Chinese Code’s Design Response Spectrum]

[02]  [Tool] SPECTR – A program for Response Spectra Analysis [反应谱计算程序]

[03]  Earthquake Response Spectra[地震反应谱]

[04]  [Tool]GB18306-2015《地震动参数区划图》地震动参数计算

[05]  GB18306-2015地震动参数确定步骤与实例

[06]  [Tool]水电工程水工建筑物标准设计反应谱计算程序(NB 35047-2015)

  • 微信公众号 ( Wechat Subscription)

WeChat_QRCode

欢迎关注 “结构之旅” 微信公众号

113 Comments

Page 2 of 3«123»
  1. liulifeng says:

    崔博士辛苦啦,希望您能发送一份这个程序,感 :lol: 谢!

  2. CJD says:

    @liulifeng  已经发送到你的邮箱。

  3. fengchong says:

    谢谢分享,麻烦给我发一份好吗

  4. CJD says:

    @fengchong  已经发送了

  5. youyang says:

    崔博士您好,我的毕业论文在做pushover分析,希望您分享我一份儿,万分感谢!

  6. CJD says:

    @youyang  已经发送到你的邮箱。

  7. 张睿 says:

    太厉害了!!求程序!谢谢!!!!

  8. CJD says:

    @张睿  已经发送到你的邮箱。

  9. Zjian says:

    感谢分享!麻烦发一下邮箱 :wink:

  10. 李伟 says:

    崔博士您好,希望能用您的软件进行学习。谢谢!

  11. CJD says:

    @李伟  已发送

  12. Husl says:

    感谢崔博士的分享,让初学者少走很多弯路

  13. CJD says:

    @Husl  已发送

  14. 小孙 says:

    谢谢崔博士分享,麻烦发我一份,多谢!

  15. CJD says:

    @小孙  已发送

  16. xiao ji says:

    崔博中秋快乐!麻烦您给我发一份,多谢!

  17. 小闫 says:

    崔博士,非常感谢

  18. CJD says:

    @小闫  已发送

  19. na says:

    请求分享,谢谢luganseu@163.com

  20. scutliuchang says:

    谢谢崔博士的分享!麻烦发我一份,谢谢啦!

  21. 张礼 says:

    太棒了,正在发愁用opensees算出的pushover曲线如何找到性能点,崔博麻烦您在分享一下您的成果了, :wink:

  22. CJD says:

    @张礼  已发送

  23. scutliuchang says:

    谢谢陈博! 麻烦发我一份 scutliuchang@gmail.com

  24. CJD says:

    @scutliuchang  本人不姓陈~~

  25. scutliuchang says:

    :mrgreen: 崔博士,实在抱歉,上一秒还在看陈博的文章,脑子一抽就给打错啦,崔博麻烦啦,发一份,万分感谢!

  26. CJD says:

    @scutliuchang  gmail发布过去程序

  27. scutliuchang says:

    崔博,没有收到您的邮件,估计不知道在那个网关被墙了,再次麻烦崔博发一下我QQ邮箱吧,实在不好意思!

  28. CJD says:

    @scutliuchang  已经发送

  29. Weijia Liu says:

    希望能够使用这个程序,我想用来分析生土建筑的抗震性能。谢谢您!

  30. CJD says:

    @Weijia Liu  已经发送

  31. Eva says:

    崔博士,求一份,正缺这个软件,解燃眉之急了 8-O

  32. CJD says:

    @Eva  已经发送

  33. CJD says:

    @Eva  已经发送 咯

  34. [Tool][结构分析][设计] Pushover Performance Point Solution Program [Pushover 分析性能点求解程序][Based on ATC 40] | 崔济东的博客 - JiDong Cui's Blog says:

    […] [01]  [Tool] Pushover Performance Point Solution Program [Pushover 分析性能点求解程序][Based on F… […]

  35. [结构分析][Abaqus] Pushover Analysis by Abaqus [Abaqus Pushover 分析] | 崔济东的博客 - JiDong Cui's Blog says:

    […] [01]  [Tool] Pushover Performance Point Solution Program [Pushover 分析性能点求解程序][Based on F… […]

  36. Liu Bali says:

    博士太牛了,定期关注您的信息,能不能发我一份呐?谢谢

  37. CJD says:

    @Liu Bali  已发送

  38. hanjiangxue says:

    崔博士好,想学习一下你的插件。 :wink:

  39. CJD says:

    @hanjiangxue  已发送

  40. 马建伟 says:

    如果您方便能否发我一个,谢谢,最近做这方面的论文。想试用您的软件。

  41. CJD says:

    @马建伟  已发送

  42. 淼淼 says:

    麻烦博士也给我发一份,非常感谢!!

  43. 淼淼 says:

    谢谢您~

  44. CFE says:

    崔博士,感谢您,给我也发一份吧

  45. bridgeli says:

    崔博士您好,我对您的【Pushover分析性能点求解程序】十分感兴趣,麻烦发送一份给我,谢谢!

  46. Aseismic says:

    崔博士,求发一份软件借鉴学习,非常感谢!

  47. 周丽 says:

    崔博士,您好!我对您的小程序十分干兴趣,刚好有个小项目,能否发一份给我,谢谢! :-P

  48. CJD says:

    @周丽  可以,已发送

  49. sun_clod says:

    崔博能分享一下程序吗?谢谢!

  50. CJD says:

    @sun_clod  能分享。已发送。

Page 2 of 3«123»

Leave a Reply

:wink: :-| :-x :twisted: :) 8-O :( :roll: :-P :oops: :-o :mrgreen: :lol: :idea: :-D :evil: :cry: 8) :arrow: :-? :?: :!: