[书]PERFORM-3D原理与实例 – 第2章 – 入门实例:平面钢框架弹性分析

[书]PERFORM-3D原理与实例 – 第2章 – 入门实例:平面钢框架弹性分析

[Book] PERFORM-3D Theory and Tutorials – Chapter 2- Quick Start Example : Elastic Analysis of Plane Steel Frame


  • 章节内容简介 [ Chapter Content Abstract ]

上一章对PERFORM-3D软件的设计思路和界面做了简要介绍,本章将通过一个平面钢框架的弹性分析算例,详细介绍PERFORM-3D中常规结构的建模、分析及结果查看的基本操作流程,以便初学者快速入门。

The design philosophy and interface of PERFORM-3D were introduced briefly in last chapter. In this chapter we will introduce the details of basic operation of normal structure modelling and analysis results check in PERFORM-3D, through an example of planar steel frames elastic analysis, so that beginners can quickly start.

  • 算例简介 [ Example Introduction ]

 图 2‑1所示为本章算例所采用的结构,为一榀、两跨、七层的钢结构框架,模型选自SAP2000自带的软件验证报告[1],构件属性如表 2‑1所示。本章将采用PERFORM-3D[2, 3]对该结构进行模态分析、弹性静力分析、动力弹性时程分析及反应谱分析,并将PERFORM-3D的分析结果与SAP2000的分析结果进行对比,验证分析结果的正确性。本章将对算例的建模、分析及后处理操作方法做一次较为详细的讲解。读者在阅读本章实例的过程中,可结合上一章对软件的整体介绍,体会并逐渐掌握PERFORM-3D前、后处理的基本操作方法。

  • 示例页面 [ Sample Pages ]


You already voted!

PS. 如有错误,请批评指正。如果你喜欢,请在上面 点个赞 吧!!详细内容请阅读书本!! 🙂  🙂  :-

Please correct me if I’m wrong. If you like this posts, please give me a “thumbs up” rating on the button above! For more information about this Chapter please refer to the book!!  🙂  🙂 )

  • 相关链接[ Acknowledgements ]

[01] 书《PERFORM-3D原理与实例》 汇总页面 (PERFORM-3D Theory and Tutorials Book Page ) (书籍主页)

[02] [Book][PERFORM-3D Theory and Tutorials — Table of Contents] [目录英文版]

[03] [Book][PERFORM-3D Theory and Tutorials – Foreword ] [前言英版文]

[04] [书]PERFORM-3D 原理与实例 – 第 1 章 – PERFORM-3D软件介绍 ( PERFORM-3D Theory and Tutorials – Chapter 1 :  Introduction of PERFORM-3D )

[05] [书]PERFORM-3D 原理与实例 – 第 3 章 – 钢筋与混凝土材料的单轴本构关系 ( PERFORM-3D Theory and Tutorials – Chapter 3 : Uniaxial Constitutive Model of Steel and Concrete Material )

[06] [书]PERFORM-3D 原理与实例 – 第 4 章 – 塑性铰模型 ( PERFORM-3D Theory and Tutorials – Chapter 4: Plastic Hinge Model )

[07] [书]PERFORM-3D 原理与实例 – 第 5 章 – 纤维截面模型 ( PERFORM-3D Theory and Tutorials – Chapter 5: Fiber Section Model )

[08] [书]PERFORM-3D 原理与实例 – 第 6 章 – 剪力墙模拟 ( PERFORM-3D Theory and Tutorials – Chapter 6: Shear Wall Simulation )

[09] [书]PERFORM-3D 原理与实例 – 第 7 章 – 填充墙模拟 ( PERFORM-3D Theory and Tutorials – Chapter7: Infilled Wall Simulation )

  • 购书链接 [ Links to Buy the Book ]

[1] 中国建筑出版在线(http://book.cabplink.com)

http://book.cabplink.com/bookdetail.jsp?id=64317&nodeid=1439

[2] 京东(www.jd.com)

https://item.jd.com/12084377.html (自营)

https://item.jd.com/12860783272.html

https://item.jd.com/12860780755.html

[3] 当当网(http://www.dangdang.com/)

http://product.dangdang.com/1260359350.html

[4] 亚马逊 (https://www.amazon.cn/)

coming soon…..

[5] 天猫书城 (https://www.tmall.com/)

Click me(点击跳转)

  • 致谢 [Acknowledgements ]

十分感谢师弟 符东龙  章节内容简介 进行了英文翻译!! 🙂  🙂  🙂  🙂 

12 thoughts on “[书]PERFORM-3D原理与实例 – 第2章 – 入门实例:平面钢框架弹性分析

  1. 蒋婷雅 Reply

    崔博士,我买了你的perform-3D, 但书里没有光盘,不知道自己建的模型错在哪里,崔博士能发一份模型到我邮箱里一下吗?

  2. liushuguang Reply

    崔博士,你的书什么时候出版?已经迫不及待想买一本了。 🙂

    • CJD Post authorReply

      :),很快了,感谢您的关注。值得等待的、用心写的好书。
      最后的校对稿已经交回给出版社了。在走最后出版的印刷的流程。 🙂 🙂 🙂 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.