[书]PERFORM-3D原理与实例 – 第7章 – 填充墙模拟

[书]PERFORM-3D原理与实例 – 第 7 章 – 填充墙模拟

[Book] PERFORM-3D Theory and Tutorials – Chapter 7 – Simulation of Infilled Wall


  • 章节内容简介 [ Chapter Content Abstract ]

在传统的结构分析中,填充墙通常作为非结构构件考虑,在分析过程中,将其以外荷载的形式施加到结构上,并对整体结构的周期进行折减以考虑填充墙对结构刚度的贡献,未直接考虑填充墙对结构非线性行为的影响。相关研究表明[1,2],填充墙对结构的抗震性能有着重要的影响,在结构弹塑性分析中,应合理考虑填充墙的影响。本章首先对砌体填充墙的抗震性能及填充墙的数值模型进行介绍,并着重介绍了基于等效斜压杆的填充墙宏观模型的参数计算方法,最后采用PERFORM-3D[3,4]对一单跨框架填充墙结构的低周往复加载试验进行模拟,讲解PERORM-3D中采用等效斜压杆填充墙模型进行框架填充墙模拟的基本步骤与参数设置方法。

In traditional structural analysis, infilled wall is usually considered as non-structural element, and its effect to structure performance was only considered by applying equivalent external load to the main structure and reducing the structure period, the contribution of infilled wall to the structural nonlinear behaviour was not considered directly. Relevant studies have shown that infilled wall has significant influence on both linear and nonlinear structural performance. Therefore, infilled wall should be reasonably considered in structural elasto-plastic analysis. In this chapter, the seismic performance and numerical model of masonry infilled wall was firstly introduced, and the parameters calculation method of the macroscopic infilled wall model based on equivalent diagonal strut theory was explained in detail. After that, a PERFORM-3D simulation of low-cyclic reversed load test of a single span infilled frame structure was conducted by step by step, to explain the fundamental modelling process and parameter definition method of the equivalent diagonal strut infilled wall model.

  • 示例页面 [ Sample Pages ]


12 0

PS. 如有错误,请批评指正。如果你喜欢,请在上面 点个赞 吧!!详细内容请阅读书本!! :-)  :-)  :-)

Please correct me if I’m wrong. If you like this posts, please give me a thumbs uprating on the button above! For more information about this Chapter please refer to the book!!  :-)  :-) )

  • 购书链接 [ Links to Buy the Book ]

[1] 中国建筑出版在线(http://book.cabplink.com)

http://book.cabplink.com/bookdetail.jsp?id=64317&nodeid=1439

[2] 京东(www.jd.com)

https://item.jd.com/12084377.html (自营)

https://item.jd.com/12860783272.html

https://item.jd.com/12860780755.html

[3] 当当网(http://www.dangdang.com/)

http://product.dangdang.com/1260359350.html

[4] 亚马逊 (https://www.amazon.cn/)

coming soon…..

[5] 天猫书城 (https://www.tmall.com/)

Click me(点击跳转)

  • 相关链接[ Acknowledgements ]

[01] 书《PERFORM-3D原理与实例》 汇总页面 (PERFORM-3D Theory and Tutorials Book Page ) (书籍主页)

[02] [Book][PERFORM-3D Theory and Tutorials — Table of Contents] [目录英文版]

[03] [Book][PERFORM-3D Theory and Tutorials – Foreword ] [前言英文版]

[04] [书]PERFORM-3D 原理与实例 – 第 1 章 – PERFORM-3D软件介绍 ( PERFORM-3D Theory and Tutorials – Chapter 1 :  Introduction of PERFORM-3D )

[05] [书]PERFORM-3D 原理与实例 – 第 2 章 – 入门实例:平面钢框架弹性分析 ( PERFORM-3D Theory and Tutorials – Chapter 2 : Quick Start Example : Elastic Analysis of Plane Steel Frame)

[06] [书]PERFORM-3D 原理与实例 – 第 3 章 – 钢筋与混凝土材料的单轴本构关系 ( PERFORM-3D Theory and Tutorials – Chapter 3 : Uniaxial Constitutive Model of Steel and Concrete Material )

[07] [书]PERFORM-3D 原理与实例 – 第 4 章 – 塑性铰模型 ( PERFORM-3D Theory and Tutorials – Chapter 4: Plastic Hinge Model )

[08] [书]PERFORM-3D 原理与实例 – 第 5 章 – 纤维截面模型 ( PERFORM-3D Theory and Tutorials – Chapter 5: Fiber Section Model )

[09] [书]PERFORM-3D 原理与实例 – 第 6 章 – 剪力墙模拟 ( PERFORM-3D Theory and Tutorials – Chapter 6: Shear Wall Simulation )

[10] [书]PERFORM-3D 原理与实例 – 第 7 章 – 填充墙模拟 ( PERFORM-3D Theory and Tutorials – Chapter7: Infilled Wall Simulation )

19 thoughts on “[书]PERFORM-3D原理与实例 – 第7章 – 填充墙模拟

  1. Pingback: [书]PERFORM-3D原理与实例 – 第14章 – 往复位移加载的两种方法 | 崔济东的博客 - JiDong Cui's Blog

  2. Pingback: [书]PERFORM-3D原理与实例 – 第5章 – 纤维截面模型 | 崔济东的博客 - JiDong Cui's Blog

  3. Pingback: [书]PERFORM-3D原理与实例 – 第 18 章 – 缩尺桥墩振动台试验模拟 ( Chapter 18: Simulation of a Reduced Scaled Bridge Column Shake Table Test) | 崔济东的博客 - JiDong Cui's Blog

  4. Pingback: [书]PERFORM-3D原理与实例 – 第 19 章 – 足尺桥墩振动台试验模拟 ( Chapter 19: Simulation of a Full Scaled Bridge Column Shake Table Test) | 崔济东的博客 - JiDong Cui's Blog

  5. Pingback: [书]PERFORM-3D原理与实例 – 第6章 – 剪力墙模拟 | 崔济东的博客 - JiDong Cui's Blog

  6. Pingback: [书]PERFORM-3D原理与实例 – 第2章 – 入门实例:平面钢框架弹性分析 | 崔济东的博客 - JiDong Cui's Blog

  7. Pingback: [书]PERFORM-3D 原理与实例 – 第1章-PERFORM-3D软件介绍 | 崔济东的博客 - JiDong Cui's Blog

  8. Pingback: [书]PERFORM-3D原理与实例 – 第 20 章 – 足尺框架伪动力试验模拟 ( Chapter 20: Simulation of a Pseudo-Dynamic Test of a Full-Scale Frame) | 崔济东的博客 - JiDong Cui's Blog

  9. Pingback: [书]PERFORM-3D原理与实例 – 第17章 – 结构整体动力弹塑性分析与抗震性能评估 (Dynamic elasto-plastic analysis and seismic performance evaluation of the whole structure) | 崔济东的博客 - JiDong Cui's Blog

  10. Pingback: [书]PERFORM-3D原理与实例 – 第16章 – Pushover 分析原理与实例 ( Chapter 16 Pushover Analysis Theory and Tutorial ) | 崔济东的博客 - JiDong Cui's Blog

  11. Pingback: [书]PERFORM-3D原理与实例 – 第15章 – 多点激励地震分析 ( Chapter 15 Multi-support Seismic Excitations ) | 崔济东的博客 - JiDong Cui's Blog

  12. Pingback: [书]PERFORM-3D原理与实例 – 第13章 – 变形监测单元 | 崔济东的博客 - JiDong Cui's Blog

  13. Pingback: [书]PERFORM-3D原理与实例 – 第12章 – 缝-钩单元 | 崔济东的博客 - JiDong Cui's Blog

  14. Pingback: [书]PERFORM-3D原理与实例 – 第11章 – 橡胶隔震支座 | 崔济东的博客 - JiDong Cui's Blog

  15. Pingback: [书]PERFORM-3D原理与实例 – 第10章 – 摩擦摆隔震支座 | 崔济东的博客 - JiDong Cui's Blog

  16. Pingback: [书]PERFORM-3D原理与实例 – 第9章 – 屈曲约束支撑 | 崔济东的博客 - JiDong Cui's Blog

  17. Pingback: [书]PERFORM-3D原理与实例 – 第8章 – 粘滞阻尼器 | 崔济东的博客 - JiDong Cui's Blog

  18. Pingback: [书]PERFORM-3D原理与实例 – 第3章 – 钢筋与混凝土材料的单轴本构关系 | 崔济东的博客 - JiDong Cui's Blog

  19. Pingback: [书]PERFORM-3D原理与实例 – 第4章 -塑性铰模型 | 崔济东的博客 - JiDong Cui's Blog

Leave a Reply

Your email address will not be published. Required fields are marked *

:wink: :-| :-x :twisted: :) 8-O :( :roll: :-P :oops: :-o :mrgreen: :lol: :idea: :-D :evil: :cry: 8) :arrow: :-? :?: :!:

This site uses Akismet to reduce spam. Learn how your comment data is processed.