[书]PERFORM-3D原理与实例 – 第3章 – 钢筋与混凝土材料的单轴本构关系

[书]PERFORM-3D原理与实例 – 第3章 – 钢筋与混凝土材料的单轴本构关系

[Book] PERFORM-3D Theory and Tutorials – Chapter 3 – Uniaxial Constitutive Model of Steel and Concrete Material


  • 章节内容简介 [ Chapter Content Abstract ]

材料非线性问题是建筑结构非线性分析中经常涉及到的问题,计算中采用的材料本构模型是否合理,直接影响弹塑性分析结果的精度,进而影响建筑结构的抗震性能评估结果。本章首先对几种典型的钢筋与混凝土材料的单轴本构进行介绍,在此基础上对PERFORM-3D [1,2]中单轴本构的处理进行介绍,并结合PERFORM-3D的规则给出常用钢筋与混凝土材料的单轴本构定义方法。

Material nonlinearity problems are very common in nonlinear structural analysis. Whether the nonlinear material model used in numerical calculation is reasonable directly influence the reliability of elastoplastic analysis results, which will further affect the seismic performance evaluation of structures. In this chapter, several typical uniaxial constitutive models of steel and concrete was first introduced. On this basis, uniaxial steel and concrete constitutive models in PERFORM-3D were explained in detail. The contents cover detailed explanation of the ‘YULRX’ backbone and the Hysteresis loops in PERFORM-3D. After that, uniaxial constitutive model properties for several commonly used steel and concrete materials were defined based on the rules of PERFORM-3D.

  • 示例页面 [ Sample Pages ]


30 3

PS. 如有错误,请批评指正。如果你喜欢,请在上面 点个赞 吧!!详细内容请阅读书本!! :-)  :-)  :-

Please correct me if I’m wrong. If you like this posts, please give me a “thumbs up” rating on the button above! For more information about this Chapter please refer to the book!!  :-)  :-) )

  • 相关链接[ Acknowledgements ]

[01] 书《PERFORM-3D原理与实例》 汇总页面 (PERFORM-3D Theory and Tutorials Book Page )

[02] [Book][PERFORM-3D Theory and Tutorials — Table of Contents] [目录英文版]

[03] [Book][PERFORM-3D Theory and Tutorials – Foreword ] [前言英文版]

[04] [书]PERFORM-3D 原理与实例 – 第 1 章 – PERFORM-3D软件介绍 ( PERFORM-3D Theory and Tutorials – Chapter 1 :  Introduction of PERFORM-3D )

[05] [书]PERFORM-3D 原理与实例 – 第 2 章 – 入门实例:平面钢框架弹性分析 ( PERFORM-3D Theory and Tutorials – Chapter 2 : Quick Start Example : Elastic Analysis of Plane Steel Frame)

[06] [书]PERFORM-3D 原理与实例 – 第 3 章 – 钢筋与混凝土材料的单轴本构关系 ( PERFORM-3D Theory and Tutorials – Chapter 3 : Uniaxial Constitutive Model of Steel and Concrete Material )

[07] [书]PERFORM-3D 原理与实例 – 第 4 章 – 塑性铰模型 ( PERFORM-3D Theory and Tutorials – Chapter 4: Plastic Hinge Model )

[08] [书]PERFORM-3D 原理与实例 – 第 5 章 – 纤维截面模型 ( PERFORM-3D Theory and Tutorials – Chapter 5: Fiber Section Model )

[09] [书]PERFORM-3D 原理与实例 – 第 6 章 – 剪力墙模拟 ( PERFORM-3D Theory and Tutorials – Chapter 6: Shear Wall Simulation )

[10] [书]PERFORM-3D 原理与实例 – 第 7 章 – 填充墙模拟 ( PERFORM-3D Theory and Tutorials – Chapter7: Infilled Wall Simulation )

  • 购书链接 [ Links to Buy the Book ]

[1] 中国建筑出版在线(http://book.cabplink.com)

http://book.cabplink.com/bookdetail.jsp?id=64317&nodeid=1439

[2] 京东(www.jd.com)

https://item.jd.com/12084377.html (自营)

https://item.jd.com/12860783272.html

https://item.jd.com/12860780755.html

[3] 当当网(http://www.dangdang.com/)

http://product.dangdang.com/1260359350.html

[4] 亚马逊 (https://www.amazon.cn/)

coming soon…..

[5] 天猫书城 (https://www.tmall.com/)

Click me(点击跳转)

  • 致谢 [Acknowledgements ]

十分感谢 师弟 符东龙  章节内容简介 进行了英文翻译!! :-)  :-)  :-)  :-) 

24 thoughts on “[书]PERFORM-3D原理与实例 – 第3章 – 钢筋与混凝土材料的单轴本构关系

  1. Pingback: [书]PERFORM-3D原理与实例 – 第15章 – 多点激励地震分析 ( Chapter 15 Multi-support Seismic Excitations ) | 崔济东的博客 - JiDong Cui's Blog

  2. Pingback: [书]PERFORM-3D原理与实例 – 第13章 – 变形监测单元 | 崔济东的博客 - JiDong Cui's Blog

  3. Pingback: [Book][PERFORM-3D Theory and Tutorials — Table of Contents] | 崔济东的博客 - JiDong Cui's Blog

  4. Pingback: [书]PERFORM-3D原理与实例 – 第16章 – Pushover 分析原理与实例 ( Chapter 16 Pushover Analysis Theory and Tutorial ) | 崔济东的博客 - JiDong Cui's Blog

  5. Pingback: [书]PERFORM-3D原理与实例 – 第12章 – 缝-钩单元 | 崔济东的博客 - JiDong Cui's Blog

  6. Pingback: [书]PERFORM-3D原理与实例 – 第10章 – 摩擦摆隔震支座 | 崔济东的博客 - JiDong Cui's Blog

  7. Pingback: [书]PERFORM-3D原理与实例 – 第7章 – 剪力墙模拟 | 崔济东的博客 - JiDong Cui's Blog

  8. Danny Chung Reply

    I am wondering if there is an English version.
    Please let me know if there is.

    Thanks.

    DC

    • CJD Post authorReply

      The book has 20 examples, almost one example per chapter.
      And there will be step by step process with many illustrations and many PERFORM-3D screen shots!
      So Chinese version won’t affect your reading! I Promise. Must never affect your reading.
      All the model will can be download on this website!

  9. carnation Reply

    麻烦崔博士发一个opensees纤维截面可视化工具!

  10. Pingback: [书]PERFORM-3D原理与实例 – 第17章 – 结构整体动力弹塑性分析与抗震性能评估 (Dynamic elasto-plastic analysis and seismic performance evaluation of the whole structure) | 崔济东的博客 - JiDong Cui's Blog

  11. Pingback: [书]PERFORM-3D原理与实例 – 第8章 – 粘滞阻尼器 | 崔济东的博客 - JiDong Cui's Blog

  12. Pingback: [书]PERFORM-3D原理与实例 – 第11章 – 橡胶隔震支座 | 崔济东的博客 - JiDong Cui's Blog

  13. Pingback: [书]PERFORM-3D原理与实例 – 第9章 – 屈曲约束支撑 | 崔济东的博客 - JiDong Cui's Blog

  14. Pingback: [Book][PERFORM-3D Theory and Tutorials – Foreword ] | 崔济东的博客 - JiDong Cui's Blog

  15. Pingback: [书]PERFORM-3D原理与实例 – 第5章 – 纤维截面模型 | 崔济东的博客 - JiDong Cui's Blog

  16. Pingback: [书]PERFORM-3D原理与实例 – 第6章 – 剪力墙模拟 | 崔济东的博客 - JiDong Cui's Blog

  17. Pingback: [书]PERFORM-3D原理与实例 – 第4章 -塑性铰模型 | 崔济东的博客 - JiDong Cui's Blog

  18. Pingback: [书][PERFORM-3D原理与实例 – 工程师评语][Book][PERFORM-3D Theory and Tutorials – Reviews by Engineers ] | 崔济东的博客 - JiDong Cui's Blog

  19. Pingback: [书]PERFORM-3D 原理与实例-第一章-PERFORM-3D软件介绍 | 崔济东的博客 - JiDong Cui's Blog

  20. Pingback: [书]PERFORM-3D原理与实例 – 第二章 – 入门实例:平面钢框架弹性分析 | 崔济东的博客 - JiDong Cui's Blog

Leave a Reply

Your email address will not be published. Required fields are marked *

:wink: :-| :-x :twisted: :) 8-O :( :roll: :-P :oops: :-o :mrgreen: :lol: :idea: :-D :evil: :cry: 8) :arrow: :-? :?: :!:

This site uses Akismet to reduce spam. Learn how your comment data is processed.